CLICK & COLLECT AVAILABLE
NARRABEEN, NSW See trading hours
2025 SNOWBOARDS NOW AVAILABLE FOR PRE-ORDER | CLOSED ANZAC DAY 25 APRIL
$799.99 $1,079.99 You save: 25% ( $280.00 )
CLICK & COLLECT AVAILABLE
NARRABEEN, NSW See trading hours
Need help? Call us on 02 9970 8600
For further info on products, payment or shipping.
HOW TO RIDE POWDER WITHOUT BACK LEG BURN.
The narrower outline of the 420 with PH allows such extreme versatility - a wide range of riders can be comfortable on this one length. Refined waist width and sidecut make it more responsive than the 420, while longer effective edge gets a little more bite into the hardpack. And the PowderHull makes it impossible to sink the nose.
DESIGNED FOR: Intermediate - Expert / Freeride, Pow
SHAPE: Directional
FLEX: Medium-Stiff 7/10
BASE: Sintered True
CAMBER PROFILE: Flat
BINDING MOUNT: 4x2 12-pack
FEATURES:
PowderHull
The 3D Powder Hull starts with a base profile that combines 2 distinct rocker lines that, when blended together, create a pronounced base concave in the nose and tail. The centerline is fully rockered starting from the insert packs, all the way to the tips of the bluntly shaped nose and tail. Out at the contact edges is a more conventional base profile that we use on many of our other boards. The resultant concave across the nose and tail acts differently at the leading end of the board than it does at the trailing end when riding in deep snow. At the leading end (nose), the concave draws air under the board – just as a concave spoon-nose does on longboards in the surf – causing lift and floatation. As the snow moves across the base it releases off the tail and the exaggerated rocker line along the center, causes the tail to drop downward.
12mm Taper
A slight taper (12mm) helps keep the nose up without loosing the tail’s ability to hold in hard-pack. Stance is only slightly set back from center of effective edge because the difference in nose and tail shovel keeps you from going over the nose.
Weightless Core
The weightless core strikes a critical balance between lightweight and strength. Using a lower density species of Poplar in areas that are not as structural and Paulownia in the areas that are, we’re able to shave precious weight off our beloved 420 and now the 20/20. This helps a board not only float, but “feel” floaty.
PH Sintered True Base
Pellets or course powder is pressed until it forms a solid. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions. Our “Sintered PH Spec” material is specifically chosen for unique flex qualities necessary for the PowderHull’s complex 3D surfacing.
Size (cm) | 154 |
Effective Edge (mm) | 1111 |
Tip Width (mm) | 324 |
Waist Width (mm) | 275 |
Tail Width (mm) | 308.9 |
Sidecut Radius (m) | 6.7 |
Stance Setback (in) | 1.5 |
Width | Regular |
FREE shipping on all orders over $100 Australia wide.
Orders under $100 will incur a $10 flat rate shipping charge.
All stock is on hand and ready to be shipped.
Find out more about our shipping options.
We offer hassle-free returns for 30 days from the date of purchase. Returns can be made in-store or by post. Before returning any items, please contact us for a return authorisation (RA) number.
Find out more about our returns policy.
All products come with full Manufacturers Warranty.
HOW TO RIDE POWDER WITHOUT BACK LEG BURN.
The narrower outline of the 420 with PH allows such extreme versatility - a wide range of riders can be comfortable on this one length. Refined waist width and sidecut make it more responsive than the 420, while longer effective edge gets a little more bite into the hardpack. And the PowderHull makes it impossible to sink the nose.
DESIGNED FOR: Intermediate - Expert / Freeride, Pow
SHAPE: Directional
FLEX: Medium-Stiff 7/10
BASE: Sintered True
CAMBER PROFILE: Flat
BINDING MOUNT: 4x2 12-pack
FEATURES:
PowderHull
The 3D Powder Hull starts with a base profile that combines 2 distinct rocker lines that, when blended together, create a pronounced base concave in the nose and tail. The centerline is fully rockered starting from the insert packs, all the way to the tips of the bluntly shaped nose and tail. Out at the contact edges is a more conventional base profile that we use on many of our other boards. The resultant concave across the nose and tail acts differently at the leading end of the board than it does at the trailing end when riding in deep snow. At the leading end (nose), the concave draws air under the board – just as a concave spoon-nose does on longboards in the surf – causing lift and floatation. As the snow moves across the base it releases off the tail and the exaggerated rocker line along the center, causes the tail to drop downward.
12mm Taper
A slight taper (12mm) helps keep the nose up without loosing the tail’s ability to hold in hard-pack. Stance is only slightly set back from center of effective edge because the difference in nose and tail shovel keeps you from going over the nose.
Weightless Core
The weightless core strikes a critical balance between lightweight and strength. Using a lower density species of Poplar in areas that are not as structural and Paulownia in the areas that are, we’re able to shave precious weight off our beloved 420 and now the 20/20. This helps a board not only float, but “feel” floaty.
PH Sintered True Base
Pellets or course powder is pressed until it forms a solid. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions. Our “Sintered PH Spec” material is specifically chosen for unique flex qualities necessary for the PowderHull’s complex 3D surfacing.
Size (cm) | 154 |
Effective Edge (mm) | 1111 |
Tip Width (mm) | 324 |
Waist Width (mm) | 275 |
Tail Width (mm) | 308.9 |
Sidecut Radius (m) | 6.7 |
Stance Setback (in) | 1.5 |
Width | Regular |
HOW TO RIDE POWDER WITHOUT BACK LEG BURN.
The narrower outline of the 420 with PH allows such extreme versatility - a wide range of riders can be comfortable on this one length. Refined waist width and sidecut make it more responsive than the 420, while longer effective edge gets a little more bite into the hardpack. And the PowderHull makes it impossible to sink the nose.
DESIGNED FOR: Intermediate - Expert / Freeride, Pow
SHAPE: Directional
FLEX: Medium-Stiff 7/10
BASE: Sintered True
CAMBER PROFILE: Flat
BINDING MOUNT: 4x2 12-pack
FEATURES:
PowderHull
The 3D Powder Hull starts with a base profile that combines 2 distinct rocker lines that, when blended together, create a pronounced base concave in the nose and tail. The centerline is fully rockered starting from the insert packs, all the way to the tips of the bluntly shaped nose and tail. Out at the contact edges is a more conventional base profile that we use on many of our other boards. The resultant concave across the nose and tail acts differently at the leading end of the board than it does at the trailing end when riding in deep snow. At the leading end (nose), the concave draws air under the board – just as a concave spoon-nose does on longboards in the surf – causing lift and floatation. As the snow moves across the base it releases off the tail and the exaggerated rocker line along the center, causes the tail to drop downward.
12mm Taper
A slight taper (12mm) helps keep the nose up without loosing the tail’s ability to hold in hard-pack. Stance is only slightly set back from center of effective edge because the difference in nose and tail shovel keeps you from going over the nose.
Weightless Core
The weightless core strikes a critical balance between lightweight and strength. Using a lower density species of Poplar in areas that are not as structural and Paulownia in the areas that are, we’re able to shave precious weight off our beloved 420 and now the 20/20. This helps a board not only float, but “feel” floaty.
PH Sintered True Base
Pellets or course powder is pressed until it forms a solid. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions. Our “Sintered PH Spec” material is specifically chosen for unique flex qualities necessary for the PowderHull’s complex 3D surfacing.
Size (cm) | 154 |
Effective Edge (mm) | 1111 |
Tip Width (mm) | 324 |
Waist Width (mm) | 275 |
Tail Width (mm) | 308.9 |
Sidecut Radius (m) | 6.7 |
Stance Setback (in) | 1.5 |
Width | Regular |
FREE shipping on all orders over $100 Australia wide.
Orders under $100 will incur a $10 flat rate shipping charge.
All stock is on hand and ready to be shipped.
Find out more about our shipping options.
We offer hassle-free returns for 30 days from the date of purchase. Returns can be made in-store or by post. Before returning any items, please contact us for a return authorisation (RA) number.
Find out more about our returns policy.
All products come with full Manufacturers Warranty.